Start · The instrument
📈  Start · The instrument

Intro to Futures

Before any method makes sense you need to know what you are actually buying, what one tick is worth, and why the size of your position is a decision you make before the trade rather than after it. Start here even if you have traded something else.

🧭
Builds on PTM Foundations

Risk, R-multiples and what a trading day is come from Foundations. This module adds what changes when the instrument is a futures contract rather than a spot pair.

Showing gold (GC). The modules that carry gold’s own numbers are 07, 08 and 10–14, with single rows in 02, 03, 04, 05, 06, 09, 15, 16, 17, 18, 19 and 20 — and on gold the direction reads are absent, measured, while the structure reads hold. Nothing on this page has been measured on gold yet: every figure below comes from the index futures (ES and NQ).
Showing crude (CL). The modules that carry crude’s own numbers are 07, 08, 10, 11, 12, 13 and 14 — and on crude the direction reads are absent, measured, while the structure reads hold. Nothing on this page has been measured on crude yet: every figure below comes from the index futures (ES and NQ).
Showing the Dow (YM). The modules that carry YM’s own numbers are 07, 08, 10, 11, 12, 13 and 14. Nothing on this page has been measured on YM yet: every figure below comes from the index futures (ES and NQ).
Showing the Russell (RTY). The modules that carry RTY’s own numbers are 07, 08, 10, 11, 12, 13 and 14. Nothing on this page has been measured on RTY yet: every figure below comes from the index futures (ES and NQ).
Showing the euro (6E). The modules that carry 6E’s own numbers are 07, 08, 10, 11, 12, 13 and 14. Nothing on this page has been measured on 6E yet: every figure below comes from the index futures (ES and NQ).
Showing the yen (6J). The modules that carry 6J’s own numbers are 07, 08, 10, 11, 12, 13 and 14. Nothing on this page has been measured on 6J yet: every figure below comes from the index futures (ES and NQ).
Showing the pound (6B). The modules that carry 6B’s own numbers are 07, 08, 10, 11, 12, 13 and 14. Nothing on this page has been measured on 6B yet: every figure below comes from the index futures (ES and NQ).
Showing the Canadian dollar (6C). The modules that carry 6C’s own numbers are 07, 08, 10, 11, 12, 13 and 14. Nothing on this page has been measured on 6C yet: every figure below comes from the index futures (ES and NQ).
Lesson 0.1

What a futures contract actually is

An agreement to exchange something at a set price on a set date. You will almost never hold one to that date. What matters day to day is that it is standardized, liquid, and moves in units you can count exactly.

A futures contract is standardized by the exchange: same size, same tick, same expiry calendar for everyone. That is the whole point. You are never negotiating terms, only price, which is why the order book is deep and the spread on the contracts below is usually one tick.

The two this curriculum is specified on

ES — the E-mini S&P 500. NQ — the E-mini Nasdaq 100. “E-mini” is the exchange’s name for the electronically traded, reduced-size version of the original pit contract. Both track an index, both are among the most liquid futures in the world, and both open to the same New York bell that the whole method is built around.

Everything here is written for these two. The reads port to other markets; the specific hours and levels do not, and the market selector at the top of each page says which figures were measured on your market.

What the indices underneath are

The S&P 500 is about five hundred large US companies, weighted by the market value of the shares available to trade, so the biggest companies move it most. The Nasdaq-100 is the hundred largest non-financial companies listed on Nasdaq, weighted the same way, which leaves it concentrated in a handful of very large technology names. The Dow (YM) is thirty companies weighted by share price rather than size, an older and stranger construction.

That is why ES and NQ usually move together, why NQ moves further, and why YM can disagree with both on the same morning. It is background, not a read: which index is “leading” is not something this course uses to pick a direction. Membership and weights change, and the index provider’s page is the authority.

Long or short, with no difference between them

You can buy first and sell later, or sell first and buy back later. Selling to open is exactly as simple as buying to open: there is nothing to borrow, no locate, and no uptick rule. If you are coming from equities, this is the single biggest change.

Every read in this curriculum works identically in both directions. That matters more than it sounds, because roughly half of what the market offers is downside, and a trader who is structurally reluctant to short is choosing to sit out half of it.

Reading a contract symbol

A symbol is root + month + year. Futures label months with a single letter, and the index contracts only ever use the four quarterly ones:

CodeMonth
HMarch
MJune
USeptember
ZDecember

The year is its last digit, so ES + Z + 6 is ESZ6: ES, December 2026. The next one along, March, is ESH7. Any example dates the moment it is written, so take the current front month from the exchange product page rather than from a lesson, this one included. Your platform will also offer a continuous symbol that always points at whichever contract is active. Chart it, and read Lesson 0.10 before you trust the old prices on it — but you cannot send an order to it. Orders go to a real contract month.

Expiry, in practice

Index futures expire quarterly, on the third Friday of March, June, September and December. There is no delivery to worry about: an index contract is cash-settled, so anything still open at expiry is squared against a final value and the difference is paid. About a week before that date — roughly the second Thursday before the third Friday — volume rolls to the next contract. You follow the volume. If your chart suddenly looks thin and the moves feel unusual, check that you are on the front month.

THE QUARTERLY ROLL front month — all the volume is here next quarter — volume arrives volume rolls — follow it 3rd-Friday expiry about a week before expiry time →
One quarterly cycle, read left to right. The front month holds the volume until the green line, about a week before the third-Friday expiry, when the volume moves to the next quarter.
Bottom line

A standardized, cash-settled agreement you will almost never hold to delivery. Two things matter day to day: selling to open is exactly as simple as buying, so half the market is not closed to you; and at the quarterly roll you follow the volume rather than the calendar.

Lesson 0.2

Why futures rather than CFDs

If you already trade currencies or CFDs, the method transfers but the instrument does not. It is worth knowing what you are moving to, because several things that are approximations on a CFD are exact here.

WHERE YOUR ORDER ACTUALLY GOES CFD / spot FX you trader trader broker A broker B broker C three prices, three spreads, three sets of volume — and the broker is often your counterparty Index futures you fund trader one book the exchange one price, one tick wide, one volume figure — and you trade against the other participants
Left, each broker quotes its own price to its own clients. Right, every participant routes into one exchange book, so only the right-hand side produces a volume figure for the whole market.
One market, one price

A futures contract trades on a central exchange — for the index contracts, the CME — the Chicago Mercantile Exchange. Every participant sees the same order book and trades against the same queue. Your broker is a route to that book, not the other side of your trade.

A CFD — contract for difference — or a spot foreign-exchange quote is made by your broker. It is their price, their spread, and frequently their book on the other side of your position. That is not necessarily sinister, but it is a structurally different relationship and it shows up in the four things below.

Index futuresCFD / spot FX
Who makes the price The exchange order book. Everyone sees the same one Your broker. It can differ between brokers on the same instrument
Spread Usually one tick on ES and NQ, with real depth behind it Variable, set by the broker, and widest exactly when you need it
What it costs Published: exchange fee + clearing + your commission. You can total it Mostly inside the spread, plus overnight financing. Harder to add up
Volume Real and centralized. Every contract traded is reported Your broker's flow only. There is no consolidated tape in spot FX
Contract Standardized and identical for everyone. Expires quarterly Broker-defined. No expiry, but financed daily
The one that matters most for this curriculum

Real volume. Two of the tools this curriculum is built on, the volume profile and the VWAP, are made out of the volume figure.

A volume profile — the subject of Modules 04–06 — is nothing but volume. It is a count of how many contracts changed hands at each price, drawn sideways. Every feature you will learn to read on it — the fat area where business piled up, the thin patch price raced through, the single most-traded price — is that count and nothing else. If the count is wrong, every one of those features is wrong with it.

A VWAP — volume-weighted average price, Modules 07 and 08 — is an average weighted by volume. Same dependency, one step less direct: the volume figure decides how much each trade counts toward the line.

On a centralized exchange both are measurements. On spot foreign exchange they are estimates built from one broker’s slice of the market, which is why the same indicator can read differently on two platforms. It is the single strongest argument for trading the index futures rather than a contract for difference on the same index.

Also true

Exchange-set margin rather than broker-set leverage. Segregated funds and exchange clearing behind every trade. And no daily financing charge — the cost of carry is already in the price, and you settle it at the quarterly roll instead.

What you give up

Granularity. FX lets you size in almost any increment; a futures contract is a fixed block. Micros recover most of that — a tenth of a mini — but not all of it. You also inherit an expiry and a roll to keep track of.

On tax

Futures and CFDs are often treated differently, and in some jurisdictions the difference is substantial. It depends entirely on where you are and is not something this curriculum can answer — but it is worth asking someone who can, because it is a real part of the comparison.

Bottom line

On a central exchange the volume figure is a measurement of the whole market. On a broker-made price it is an estimate built from one slice. Since the volume profile and the VWAP are made of nothing but volume, that single difference is why this curriculum is specified on futures rather than a contract for difference.

Lesson 0.3

Ticks, points and dollars

The single most useful thing a new futures trader can memorize. Until a point has a dollar value in your head, no stop distance means anything to you.

ContractTickPer tickPer point
ES — E-mini S&P0.25$12.50$50
MES — Micro E-mini S&P0.25$1.25$5
NQ — E-mini Nasdaq0.25$5.00$20
MNQ — Micro E-mini Nasdaq0.25$0.50$2
YM — E-mini Dow1$5.00$5
MYM — Micro E-mini Dow1$0.50$0.50
RTY — E-mini Russell 20000.10$5.00$50
M2K — Micro E-mini Russell0.10$0.50$5
GC — Gold, 100 oz0.10$10.00$100
MGC — Micro Gold, 10 oz0.10$1.00$10
CL — Crude oil, 1,000 bbl0.01$10.00$1,000
MCL — Micro Crude, 100 bbl0.01$1.00$100
Why the table is the lesson

Look down the last column. A ten-point move is not one thing:

Ten points on…is worth
YM$50
NQ$200
ES$500
GC$1,000
CL$10,000

Two hundred times the money for the same number on the screen. That is why “I use a 20-point stop” is a meaningless sentence until you say what you are trading, and why a habit built on YM will hurt you the first time you take it to crude. Points are a unit of distance. Only dollars are a unit of risk.

A micro is one tenth of a mini. That is the only difference — same chart, same hours, same levels, same method. It exists so that position size can be a dial rather than a switch.

These are contract specifications set by the exchange, not measurements of the market — which is a property worth knowing rather than a footnote. A specification can be changed by the exchange, and occasionally is. Treat the product page as the authority and any table, including this one, as a convenience.

WHY MICROS MAKE SIZE A DIAL 1 mini one step, or nothing = 10 micros — same total exposure, ten steps smallest position largest position your fixed risk and the stop pick the step
One mini against ten micros of the same total exposure. Read the ten boxes as how finely you can size to a fixed risk: the stop distance decides how many of them that risk buys.
Why the micros matter later

This method grades every trade before you take one, and the grade decides whether you take it, never how big. Size comes from your fixed risk and the stop. Micros matter because they let that size land close to your risk instead of rounding to zero or to one whole mini (Lesson 0.6). Module 17, Stop, Target & Grade, sets that order out in full.

Bottom line

Ten points is $50 on the Dow and $10,000 on crude, so no stop distance means anything until you have converted it. Points are a unit of distance and only dollars are a unit of risk — and micros exist so that position size can be a dial rather than a switch.

Lesson 0.4

ATR, the unit that makes a distance mean something

Ticks and points are set by the exchange. How far the market actually travels is not, and almost every figure in this course is quoted in this third unit.

Twenty points on NQ in 2012 and twenty points on NQ today are not remotely the same event, because the index moved an order of magnitude in between. A point count is comparable neither across instruments nor across years. ATR — short for average true range, although this course uses a simpler version of it, set out below — is the average distance the market covers in a session, and it turns a raw distance into a proportion of a normal day.

Saying a level sits 0.6 of ATR away means the same thing on ES and NQ, in 2010 and 2026. Saying it sits twelve points away means none of those things. Whenever a number later in this course is given in ATR rather than points, that is why.

What the “true” is doing there

An ordinary range is the high minus the low. True range takes the largest of three numbers: the high minus the low, the high minus yesterday's close, and the low minus yesterday's close. The extra two exist so that a gap counts as movement. A stock that closes at 100, opens at 110 and then sits still all day has almost no plain range, while the market plainly moved from 100 to 110.

IT IS NOT ENOUGH TO SAY “ATR” · WHICH ONE IS LOAD-BEARING What the “true” is doing there the largest of three: high minus low, high minus yesterday's close, low minus yesterday's close the extra two exist so that a gap counts as movement How often it actually changes the number measured across the whole futures session about 6% of sessions — a real gap is rare measured on the regular session alone 38.7% ES and 36.9% NQ — nearly four days in ten What this course uses the average of the last fourteen plain regular-session ranges — 09:30 to 16:00, completed sessions only an ATR built from regular-session true ranges runs about 10% larger than this one checked rather than assumed: asked which basis better forecasts the session ahead, the regular-session average wins on both
Top, the three numbers true range takes the largest of. Middle, how often that changes the answer: rarely across the whole session, nearly four days in ten on the regular session. Bottom, the plain regular-session average this course uses.
And it matters more than it looks, because of which session you measure on

That correction was built for markets that stop trading overnight. Measured on the whole futures session, it barely applies here: the contract trades nearly around the clock, so a real gap is rare and true range exceeds plain range on about 6% of sessions on both contracts.

But this course measures ATR on the regular session only, and there the prior close is yesterday's 16:00 — with a whole overnight in between. On that basis true range exceeds plain range on 38.7% of ES and 36.9% of NQ sessions, nearly four days in ten. The consequence is a real number rather than a technicality: an ATR built from regular-session true ranges runs about 10% larger than the one this course uses. So it is not enough to say “ATR”. The next section says exactly which one, and it is load-bearing.

Which ATR this course means

Every ATR figure here is the average of the last fourteen regular-session ranges — 09:30 to 16:00, completed sessions only. Not the overnight. Each range is the plain high minus low, not the true range, so despite the name this course’s ATR is an average range: about 10% smaller than a true-range ATR built on the same sessions.

That is not a stylistic choice, and it was checked rather than assumed. Asked which basis better forecasts the range of the session you are about to trade, the regular-session average wins on both instruments. Using the whole session instead is slightly worse, and using both together adds nothing at all, because the two averages correlate at 0.99.

That correlation is the useful part. A whole-session ATR is not different information from a regular-session one. It is the same information at a different scale — about 1.3 times larger, because it includes an overnight you were never going to trade.

Which means your chart will disagree with these numbers

A platform's ATR on a futures daily chart measures the whole session, because the daily candle opens at 18:00 the evening before — the point Lesson 0.7 makes.

Median range on a normal dayESNQ
This course — regular session only22.0 pts61.5 pts
A daily-chart ATR — whole session28.5 pts77.0 pts

Read “0.6 of ATR” here and take the number off a daily chart and you will size about a quarter too wide. Either anchor your ATR to the regular session, or scale the chart's figure down by roughly a fifth.

And the one thing that genuinely improves it

If a fourteen-session average is your whole estimate of today's size, you are ignoring something free that is already finished before the bell. Last night's range, from 18:00 to 09:29, added to the average, forecasts today's session range substantially better than the average alone.

What you use to estimate today's rangeHow much it explains
ES / NQ
The 14-session average alone0.61 / 0.77
The whole-session average instead0.60 / 0.77
The average plus last night's range0.68 / 0.81

Each year was scored with a fit made only on the years before it, roughly 4,700 sessions per instrument. Each figure is the share of the day-to-day variation in range that the estimate explains, where 1.0 would be perfect.

The habit worth forming now

Before the bell, look at what the overnight did. A wide overnight means a wider session is coming; a quiet one means a smaller day. It costs nothing, it is complete one minute before you size, and it is the single largest improvement available to a range estimate anywhere in this course. Module 11 Lesson 11.2 puts it to work on the width of the opening range.

The units stack, and each answers a different question. Ticks are what the instrument can move in. Dollars are what a move costs you. ATR is whether that move is large or small for this market, right now. You need all three before a stop distance means anything, which is why the next two lessons come after this one.

One more number, and it is not a distance

From Module 01 onward this course quotes a lot of results as a difference between two percentages — a signal wins 56.3% of the time against a background of 53.7%. That gap is 2.6 percentage points, and it is the second unit you will meet constantly.

Two units, and they are easy to confuse

Percentage points are conventionally shortened to “points”, which is exactly the word Lesson 0.3 just spent a page defining as fifty dollars on ES. So this course does not shorten it. A bare “points” here always means price. A gap between two rates is always written out as percentage points, or pp.

When the number is…It is quoted inBecause
A distance, a range, a stop, a targetATRIt means the same thing on both contracts and in every year
A difference between two rates or oddspercentage points (pp)It is not a distance at all, and calling it points would say it was
What a move is actually worthticks and dollarsThat is what the account is denominated in
The result of a tradeROne R is the amount you risked, so a result compares across sizes and instruments. Lesson 0.6 builds it

Keeping distance in one unit is not tidiness. A ratio taken from raw point figures over a long sample is mostly a statement about how much price grew — one table in this curriculum read as a nearly six-fold effect in points and about 1.1 to 1.3-fold in ATR, and the points version was wrong. You will see that correction made in the open in Module 08, because the mistake is a natural one and worth watching yourself make.

Bottom line

Every distance in this course is quoted in ATR, an average of plain regular-session ranges, because a point count is comparable neither across instruments nor across years. Your platform's daily-chart ATR is about a quarter to a third larger, so scale it down by about a fifth or you will size too wide. And the units do not overlap: a bare “points” here always means price, while a gap between two rates is always percentage points.

Lesson 0.5

Margin is not your risk

The most expensive misunderstanding in futures, and conventionally the one blamed for most early account failures.

What margin is

A good-faith deposit the broker holds while the position is open. Day-trade margin on an index future can be a few hundred dollars. It tells you what you are allowed to hold. What the contract actually controls, its notional value, is price × point value: on one ES, several hundred thousand dollars.

What your risk is

Distance to your stop, times the dollars per point, times contracts. Nothing else. It tells you what you can actually lose. The two numbers are unrelated.

ONE NQ CONTRACT, 40-POINT STOP DAY MARGIN $500 what the broker holds to let you open it YOUR RISK $800 40 points × $20 — what you can lose the two numbers are unrelated, and only the second one is yours to choose
One NQ contract with a 40-point stop. The risk bar is longer than the margin bar, and only the risk bar is a number you set.
Work it through once

One NQ contract might need $500 of day margin. If your stop is 40 points away, your risk on that trade is 40 × $20 = $800 — more than the margin that let you open it. The broker's number was never a risk number.

Leverage is what makes both figures small relative to the position. It cuts in exactly the same proportion in both directions, and it is the reason the next lesson exists.

What happens when the loss keeps going

This is the part that makes the misunderstanding expensive, and it follows directly from the numbers above. Margin is a deposit, not a maximum loss. Nothing about posting $500 caps what the position can cost you.

As an open position moves against you, the money comes out of the account in real time. Fall below the level the broker requires and one of two things happens: you get a margin call asking for more, or — far more commonly intraday — the broker simply closes the position for you, at market, at whatever price is available, without asking. Most retail futures brokers auto-liquidate rather than call.

And the floor is not zero

If price moves far enough fast enough — a gap through your level, a news release into a thin book — the position can close below the point where your account balance runs out, and you owe the difference. It is uncommon on ES and NQ, which are among the deepest markets in the world, and it is not impossible. This is the concrete reason Lesson 0.8 insists the stop goes into the market when you enter rather than living in your head, and the reason Module 20 treats risk as the first constraint rather than the last.

A funded account changes the mechanism and not the lesson. There you cannot owe a firm money, but the drawdown rule closes you out and the account is gone — which is the same event arriving through a different door.

Bottom line

Margin tells you what you are allowed to hold. Risk is stop distance times dollars per point times contracts, and it is routinely larger than the margin that let you open the trade. The deposit was never a cap on what the position can cost you.

Lesson 0.6

Risk first, size second

Decide what a loss costs before you decide how many contracts. Every professional sizing routine is this one inversion, and almost every blown account is the other order.

1 · Fix the money
What this trade may cost. A fixed fraction of the account, typically around 1%. Set once, not per trade.
2 · Find the stop
Where the idea is wrong, plus a buffer. The market decides this distance, not you.
3 · Derive the size
Contracts = risk dollars ÷ (stop in points × dollars per point). Round down. Use micros for the remainder.
4 · Sanity check
If the honest stop makes the size less than one micro, the trade is too wide for the account. Skip it.
Worked example

$25,000 account, 1% risk = $250 per trade. The honest stop on today's NQ setup is 30 points. 30 × $20 = $600 per mini, which is too much. 30 × $2 = $60 per micro, so $250 ÷ $60 = 4 micros ($240 risked).

Notice what did not happen: the stop was never moved closer to justify a bigger position. The stop is set by the chart, and the size absorbs it.

Position-size calculator
Position size —
Enter what you are willing to lose, and where the stop has to go.
R — the unit everything else is quoted in

One R is that fixed risk amount. A trade that makes twice what it risked is +2R. Quoting results in R rather than dollars lets you compare a trade taken on 4 micros with one taken on 2 minis. A trade result in this curriculum is always quoted in R — while distances go in ATR and gaps between rates in percentage points, as Lesson 0.4 sets out. Three quantities, three units, and they do not overlap.

Bottom line

Fix the money, find the stop, derive the size. The market sets the stop distance and the size absorbs it — the moment you move a stop closer to justify more contracts you have inverted the routine, and that inversion is what empties accounts.

Lesson 0.7

The trading day

Index futures trade nearly around the clock, which is a trap. Almost all of what this method uses happens in a six-and-a-half hour window.

MomentTime (ET)Why it matters
Session reset18:00 The new trading day begins. Daily candles roll here, not at midnight
The open09:30 New York equities open. The single most important instant in the method
The close16:00 Equities close. The day's work is finished

How concentrated is it? The first hour after the bell carries about a third of the entire session's volume and is the heaviest hour of the day on nine days in ten, measured across roughly 4,600 sessions per instrument. Module 09 builds the whole clock on that fact. It is worth carrying from the start, because it means the day is largely decided while most people are still settling in.

Overnight, price is still moving and still printing the levels you will use tomorrow. You are not trading it. The full session map — Asia, London, pre-NY and New York, and the levels each one hands you — is Module 09, The Session Clock.

If you are on a funded account, this is a hard rule

Most prop firms require you to be flat before the daily halt at 17:00, and some count a held position as a breach. This method is written to be executable on a funded account, which means no position is carried through the changeover. Trades are opened and closed inside the New York session.

Bottom line

Index futures trade nearly around the clock, and almost everything this method uses happens between 09:30 and 16:00. The first hour alone carries about a third of the session's volume, which means the day is largely decided while most people are still settling in.

Lesson 0.8

Getting in and out

Two order types do almost everything, and the choice between them is a real decision with a real cost. Later modules assume you know this, so here it is.

Market order

Take whatever price is available now. You are guaranteed to get in; you are not guaranteed the price. Use it when being in matters more than the last tick.

Limit order

Name your price and wait. You are guaranteed the price; you are not guaranteed a fill. Use it when you have a level and the patience to be left behind.

The spread, and slippage

At any instant there is a highest bid and a lowest offer. The gap between them is the spread — on ES and NQ it is usually one tick, which is part of why this method is specified on them.

Slippage is getting filled worse than you expected, and it is a market-order phenomenon. It is small on a quiet tape and it is not small in the first minutes after the bell or on a news release, which is one reason the clock in Module 09 matters.

A stop is an order too

A stop order (a stop-market) rests until price reaches your level, then becomes a market order — so it is guaranteed to act, not guaranteed to fill where you asked. Put the stop in the market when you enter. A stop you are holding in your head is not a stop, which is why Module 18 Lesson 18.7 attaches it to every entry with a bracket order — a stop and a target sent with the entry, where one filling cancels the other — and puts a platform lockout on the day behind it.

The stop that does not stop

Platforms also offer a stop-limit: when price touches your level it becomes a limit order, not a market one. On a quiet tape the difference is invisible. On a fast move or a news print, price can jump straight through the limit and keep going, and the order sits there unfilled while the loss grows. A stop-limit protects the price and gives up the exit, which is exactly backwards for a protective stop. Your protective stop is a stop-market. Check which one your platform’s bracket sends by default.

Which of the two you use to enter is a genuine trade-off this method returns to in Module 16, The Trade: rest a limit at the level and risk no fill, or take market on the confirmation and accept a worse price. Your stop is anchored to the level either way, so a chased entry buys a wider stop and a smaller multiple — which turns the decision into arithmetic rather than preference.

Before your first live order

Most first-week accidents are not trading mistakes. They are clicks: the wrong account, the wrong month, a mini where a micro was meant. None of them is a read, and all of them are preventable by checking the ticket before you send it.

  1. The account. Simulator, evaluation, funded or your own. They look identical on screen.
  2. The contract. The front month, not a thin back month, and not the continuous symbol you chart (Lesson 0.1).
  3. Micro or mini. MES and ES sit next to each other in every symbol search. The wrong one is a ten-times risk error in either direction.
  4. Direction and size. Buy or sell as intended, and the contract count from Lesson 0.6, not from the platform’s default quantity.
  5. The bracket. Stop and target attached at entry, and the stop is a stop-market.
  6. Copied accounts. If one order is mirrored across several accounts, confirm every one of them filled, at the size you meant.

Do it in the simulator until it is boring, then keep doing it. The check takes ten seconds; the mistake it prevents can take the account.

Bottom line

A market order buys certainty of being in, a limit buys certainty of price, and you cannot have both. Whichever you use, the stop goes into the market when you enter, as a stop-market: one you are holding in your head is not a stop, and a stop-limit can be skipped altogether. Check the account, the month, micro or mini and the bracket before every send.

Lesson 0.9

Why this instrument makes the rest possible

One consequence of Lesson 0.2 deserves its own place, because the entire curriculum rests on it and it is easy to read past.

A futures contract trades on a central exchange. Every participant sees the same order book, and every contract traded is reported to the same tape. Which means the volume figure on your chart is a measurement of the whole market, not one broker's slice of it.

That is what makes an auction observable. The next module explains that the market is an auction whose job is to find trade — and that where business piled up tells you something real. That claim only works if you can actually see where business piled up. On a centralized exchange you can. On a broker-made price you are looking at an estimate of it.

Everything downstream inherits this. A volume profile is nothing but volume. A volume-weighted average price is nothing but volume. The value area, the high-volume node, the thin patch price raced through — each is a statement about how much business happened where, and each is only as trustworthy as the volume figure underneath it.

So the instrument is not a detail you settle before the real material starts. It is the reason the real material is measurable at all — and it is the honest answer to "why futures rather than the index on my existing platform".

And a consequence worth taking seriously

There are hundreds of futures markets. Ignore almost all of them. The traders who last read one market the way you read a first language, and that only comes from seeing the same instrument open thousands of times. Spreading across markets is how people miss entries, fumble management, and never build the pattern recognition the rest of this course assumes. Pick ES, add NQ when it is second nature, and treat everything else as confirmation rather than opportunity.

Bottom line

Everything downstream is built on the volume figure, and on a central exchange that figure is the whole market rather than one broker's slice. That is what makes the auction observable at all, and it is the honest answer to why futures rather than the index on the platform you already have.

Lesson 0.10

The contract expires — and that changes things

A share of stock lasts forever. A futures contract has a death date, and everything awkward about futures charting follows from that one fact.

When you buy ES you are not buying the S&P 500. You are agreeing a price for a delivery that happens on a particular date. That date arrives, the contract stops existing, and the liquidity moves to the next one. Traders do not usually hold to delivery — they roll: close the expiring contract and reopen in the next one.

Two contracts, two prices, at the same moment

The expiring contract and the next one do not trade at the same price. The further-out contract reflects more financing cost, offset by more expected dividends, so it sits at a small premium or discount. That difference is the roll gap, and it is the reason a futures chart needs to make a decision no stock chart ever has to.

Why this matters to you before you have placed a single trade

Every level you mark — yesterday’s high, a weekly high, the opening range — is a price. If your chart splices contracts together and adjusts the old data to hide the roll gap (a back-adjusted chart, as against a raw one that leaves the gap visible), those old prices are no longer the prices that traded, and a level you mark off them sits somewhere the market never went. That is the whole problem, and the fix is a setting: chart the continuous symbol unadjusted (raw), so old prices are prices that traded. Module 04’s settings checklist asks you to confirm it.

How often you roll depends entirely on the market

This is the part people coming from one instrument get wrong when they touch another. The indices roll four times a year and you can almost forget about it. Gold does not. Crude certainly does not.

MarketContract monthsRolls per year
ES, NQ, YM, RTY · index futures Mar, Jun, Sep, Dec4
ZB, ZN, ZF · treasuries Mar, Jun, Sep, Dec4
6E, 6J, 6B, 6C · FX Mar, Jun, Sep, Dec4
SI, HG · silver, copper Mar, May, Jul, Sep, Dec5
GC · gold Feb, Apr, Jun, Aug, Oct, Dec6
CL, NG · crude, natural gas Every month12

Expiry months are fixed by the exchange and differ by asset class, so a habit built on index futures will not carry to crude. The exchange product calendar is the authority.

What a monthly roll does to your chart

On ES a roll gap turns up four times a year and you will barely notice. On CL it happens every month, so a year of chart history contains twelve of them. The further back you look on a spliced crude chart, the more accumulated adjustment sits between what you are seeing and what actually traded. The more often a market rolls, the less you should trust old prices on a continuous chart of it. This method is specified on the indices, which are the gentlest case — do not assume the habits transfer.

RTH and ETH — two views of the same contract

RTH is regular trading hours — the cash session, 09:30 to 16:00 New York. ETH is extended trading hours, the nearly round-the-clock futures session wrapped around it. This is the other setting that changes what you see, because a futures contract trades almost continuously but the cash market it tracks does not.

ONE FUTURES DAY · NEW YORK TIME chart ETH ETH — electronic / overnight, the whole session daily halt first hour after the bell: about a third of the session’s volume trade RTH RTH — regular trading hours opening range, 09:30–09:45 overnight: the Asia and London ranges and the gap into the open 18:00 · session reset, the daily candle rolls 09:30 16:00 17:00 18:00 Chart ETH, trade RTH: the NY VWAP still anchors to 09:30, whatever you chart.
One futures day, read left to right from the 18:00 reset. Notice how small the part you trade is: RTH sits inside a session that runs almost the whole day, and its first hour does about a third of the business. Charting ETH only makes the overnight visible; it moves nothing you anchor to.

ETH — electronic / overnight

The whole session, 18:00 to 17:00 ET. Shows the overnight move, the Asia and London ranges, and the gap into the open. Chart this. You want to see everything that built the level.

RTH — regular trading hours

09:30 to 16:00 ET. The cash-market session, and where this method takes its trades. Trade this.

Phantom Rule

Chart ETH, trade RTH. Seeing the overnight does not change a single anchor — the NY VWAP still anchors to 09:30 and the opening range is still 09:30–09:45. It only stops the overnight from being invisible to you. The full session clock is in Module 09.

The four that catch people
  • Charting a single contract month and finding the history too short to mark last week’s levels. A contract only shows its own life; the continuous symbol (on TradingView, the one ending in 1!) carries the history, with the roll caveats above.
  • Charting RTH-only, then wondering why a level everyone else is watching is not on your chart — it formed overnight.
  • Assuming a roll gap is a real move and marking a level on it.
  • Carrying index habits into gold or crude, where the roll comes round one and a half to three times as often.
Bottom line

A contract with a death date is the source of everything awkward about futures charting. Splice two of them together and the old prices are no longer prices that traded, so a level marked off them sits somewhere the market never went. Chart ETH, trade RTH, and do not carry index roll habits into gold or crude. That is the chart settled.

Lesson 0.11

What you are about to learn

The rest of the curriculum is one trade, taught in the order you actually make the decisions on the day.

You willWhich meansWhere
Understand the machineWhy price moves at all, who is on the other side of your order, and what it means when price stays somewhere rather than passing throughPart 1
Learn the instrumentsThe volume profile, the volume-weighted average price, and the session objects — the opening range, the initial balance, the clockParts 2–4
Build the map, read the dayWhich levels are in play, and how the reads combine into a direction — including what to do when they disagreePart 5
Take the tradeConfirmation, the entry, the stop, the target and the gradePart 6
Run it, then run yourselfManagement, the daily routine, sizing, and the funded gamePart 7
Check the evidenceWhat has been measured, what is taught, and how to test your own additions without fooling yourselfPart 8

Words you will meet before they are taught

Each of these is a thing on a chart, not a theory. You do not need to understand them yet — you only need to know that none of them is jargon for its own sake.

The wordWhat it actually isTaught in
The auctionThe mechanism underneath everything — the market advertising a price and looking for someone to take itPart 1
ValueThe band of prices where business is actually being accepted, as opposed to where price merely wentPart 1
The profileA picture of how much business happened at each price. The chart turned on its sidePart 2
VWAPVolume-weighted average price — a running average of what has been paid so far, weighted by sizePart 3
The opening rangeThe high and low of the first fifteen minutes, 09:30–09:45Part 4
The initial balanceA different object with the same start time, and a different job. Never the same thing as the opening rangePart 4

One instruction before you go on. Do not trade any of this with money while you are learning it. Every broker and every funded program offers a simulator on the same data. The method has a fixed clock and a graded decision, which makes it unusually easy to practise honestly — you will know by the end of the first week whether you are actually following it.

Taught vs Tested

ClaimStatus
Contract specifications — tick size, tick value, point value, expiry months Definitional — exchange specifications, not measurements. Check the product page if a number ever looks wrong; exchanges do re-specify contracts
Margin is not risk. Risk is stop distance × dollars per point × contracts Definitional — arithmetic. It would be identical if prices came from a dice roll
Fix the money, find the stop, derive the size Taught — the professional order of operations, and the inversion of the order that empties accounts
Centralized volume is a measurement; broker volume is an estimate Definitional — a fact about market structure, and the reason every volume-weighted tool in this curriculum is trustworthy here and approximate elsewhere
Learn it in a simulator first Taught — and easier to hold yourself to with a mechanical method than a discretionary one, because you can check whether you followed it
Bottom line

The rest of the curriculum is one trade, taught in the order you actually make the decisions on the day. Learn it in a simulator first — a method with a fixed clock and a graded decision is unusually easy to check yourself against. Module 01 states the engine that trade runs on.

Before you move on

Five questions with the answers hidden, and one thing to do on a chart. The answers are all in this module’s own table, so a question you cannot answer points at a lesson rather than at a gap in your trading.

01Your broker shows $500 of day margin on one ES contract. How much are you risking?

Nothing yet, and margin never answers that question. Margin is what you must post to hold the position; risk is stop distance × dollars per point × contracts. That is plain arithmetic, and it would be identical if prices came from a dice roll. A $500 margin sits happily behind a $2,000 loss. Lesson 0.5.

02“I can afford three contracts, so where should the stop go?” What is wrong with the order of that sentence?

It is inverted, and this is the inversion that empties accounts. Fix the money first, find the stop the trade actually needs, then derive the size from those two. Size is the output, never the input. This is taught as the professional order of operations rather than measured. Lesson 0.6.

03Why will this course almost never tell you a distance in points?

Because ten points is a different object on ES than on NQ, and a different object on a quiet day than a busy one. Distances are quoted in ATR so that one number means the same thing across instruments and across volatility, and a bare “points” in this curriculum always means price. Lessons 0.3 and 0.4.

04A level everyone else is watching is not on your chart at all. What is the most likely reason?

You are charting the regular session only and the level formed overnight. The neighbouring error is the same mistake in reverse: taking a roll gap for a real move and marking a level on it. Both come from Lesson 0.10, and both are about knowing which hours and which contract you are actually looking at.

05Why does this course trust volume-weighted tools on futures and treat them as approximate elsewhere?

Because centralized volume is a measurement and broker volume is an estimate. Every participant trades against the same book, so the volume figure is the real one. That is a fact about market structure rather than a result, and it is the reason the profile and the VWAP are worth building at all here. Lessons 0.2 and 0.9.

Before Module 01, once

This one is arithmetic rather than chart reading, and you should only ever have to do it once.

  1. Open the exchange product page for what you trade. Write down tick size, tick value, point value and the next expiry. The product page outranks any table, including this one, because exchanges do re-specify contracts.
  2. Decide the money. One number you are willing to lose in a day, and the per-trade number that follows from it.
  3. Turn a distance into dollars. Take yesterday’s ATR, and work out what a stop of 0.2 ATR costs you on one contract, in points and in dollars. Then do it for the day the ATR doubles.
What this is and is not for

None of this is a read and none of it is a trade. It is the arithmetic you should never be doing in the middle of a session, and the reason to do it now is that every later module quotes distances in ATR and assumes you can turn one into money without stopping to think.

Next →01 · The Spine

The one idea underneath every trade in this curriculum.

← Back to the mapPTM Futures